International Company is looking for an Inspection Engineer


POSITION: Inspection Engineer


Assist the Senior Engineer with the effective provision and operation of inspection systems and services to the allocated sites. To ensure that plant and equipment is Certified in accordance with Oceaneering and Client codes of practice, strategies and legislation.



  • Develop or update Written Schemes of Examination or equivalent (e.g. Inspection Test Plan) as part of inspection preparations as required
  • Plan and carry out pre-surveys of equipment and where necessary identify preparation for inspection and Non Destructive Examination (NDE) requirements
  • Carry out Inspection of plant and pipework  within the limitations of the issued Letter of Authority (LoA) in compliance with the Written Scheme of Examination or equivalent as well as Oceaneering and client procedures
  • Supervise Oceaneering personnel and third parties.  Ensure the contractor understands the workscope, associated risks and the work is completed and reported as specified in the workscope.  Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel
  • Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected  ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports
  • Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties
  • Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure
  • Provide remedial recommendations as required and inspect the subsequent repair work for acceptance
  • Update or provide information for updating the inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities as required
  • Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc.
  • Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures
  • Issue status reports as required e.g. daily/ weekly/ handover, etc.


Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment.


Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems.

Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.



  • Minimum UKAS RG2 Category 3 compatible (E)
  • ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) in a suitable engineering subject (E)

(Mechanical Engineering (P))

Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification e.g. ASME or API certification. 

Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision criteria workflow)


  • HNC or greater in an Engineering related discipline (P)
  • Incorporated Engineer as defined by the Engineering Council or working towards award (P)
  • API 510 Pressure Vessel Inspector and API 570 Piping Inspection certification (P)
  • API 653 Tank Inspection certification (P) (Note: (E) essential for some roles/clients where the Inspection Engineer is required to inspect large storage tanks)
  • NDT certification for core techniques (P)
  • Confined Space Entry training (P)                                        

Knowledge, Experience, Skills, Abilities, and Other Characteristics

  • Minimum 5 years of specific experience related to the job description (E).
  • Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment (E)
  • Must be familiar with QA/QC systems/procedures and NDE techniques (E)
  • Microsoft Office (E)
  • ACET or equivalent (P)
  • Ability to generate a team approach to problem solving (E)
  • Good client or support contractor relationship skills at various levels of seniority or diverse cultures (E)
  • Good communicator both written and verbal  (E)

Working Conditions

This position is considered SITE/INDOORS which is characterized as follows:

  • Requires working outdoors, exposed to all weather conditions
  • Includes exposure to sounds and noise levels that are distracting or uncomfortable
  • Includes exposure to contaminants
  • Requires working in cramped work spaces and getting into awkward positions
  • Requires working in extremely bright or inadequate lighting conditions

Please send your CV to [email protected]